Wuhan's rainy season humidity consistently exceeds 85% for extended periods, making it a natural laboratory for testing floor brand performance. I've recently compared 3 floor brands available locally in Wuhan to provide a reference for Zeekr 9X dad families.
▲ Zeekr 9X Wuhan rainy season modification effect real shot
3 Comparison Brands
Brand A: A leading aviation aluminium brand (10+ years of market validation). - Process: HPL high-temperature lamination - Wear resistance revolutions: 11000 revolutions - Price: 5000-8000 yuan - Wuhan local stores: 3 stores
Brand B: An emerging brand (established 3 years). - Process: Film lamination cold press - Wear resistance revolutions: 8000 revolutions - Price: 3000-5000 yuan - Wuhan local stores: 5 stores
Brand C: A cost-effective brand (established 5 years). - Process: UV printing - Wear resistance revolutions: 2800 revolutions - Price: 2000-3000 yuan - Wuhan local stores: 8 stores
Wuhan Rainy Season Comparison Real Test
I tracked one car each from the 3 brands during the Wuhan rainy season (6–7 months) (all Zeekr 9X, same usage environment), and made a comparison after 2 months.
Comparison item 1: Floor mildew. Brand A: 0 mildew; Brand B: 1 light mildew spot under the floor mat; Brand C: 3 mildew spots under the floor mat + 1 mildew spot in the seam.
Comparison item 2: HPL layer/UV layer condition. Brand A: HPL layer intact; Brand B: slight edge lifting of the film layer; Brand C: 1 spot of UV coating peel-off in the luggage area (2cm²).
Comparison item 3: Foot feel change. Brand A: foot feel maintained; Brand B: foot feel slightly hardened (PE layer moisture absorption); Brand C: foot feel noticeably softened (PVC bottom layer moisture absorption).
Comparison item 4: Cleaning difficulty. Brand A: dense HPL layer, easy to clean; Brand B: surface is okay, but lifted edges are hard to clean; Brand C: UV coating peeled off exposing the bottom layer, difficult to clean.
Modification Suggestions for Zeekr 9X Wuhan Dads
As a family MPV, the priority for Zeekr 9X dads to modify the floor:
- Families with kids: Brand A (eco-friendly + durable + mature after-sales system)
- Limited budget: Brand B (moderate price, acceptable performance)
- Tight budget + short-term use: Brand C (low price, but needs replacement in 3-5 years)
Not recommended: Bamboo fibre aviation aluminium (high risk during Wuhan rainy season)
Top 3 Concerns for Zeekr 9X Dads
Question 1: Is the eco-friendliness really good? Brand A's HPL process has formaldehyde emission ≤0.01mg/m³ (undetectable level), which is 50 times stricter than the national E1 standard (≤0.5mg/L). Dad families can rest assured.
Question 2: Is after-sales repair convenient? Brand A has 3 authorized stores in Wuhan with after-sales response time within 24 hours; Brand B has 5 but some are franchise stores; Brand C has 8 but slow after-sales parts supply.
Question 3: How to choose among 3 brands? Sufficient budget → Brand A, limited budget → Brand B, tight budget → Brand C but accept 3-5 year replacement.
3 Brands Price and Performance Comparison List
Displayed by dimension list (non-tabular):
- Process route: Brand A is HPL high-temperature lamination, Brand B is film lamination cold press, Brand C is UV printing
- Wear resistance revolutions: Brand A 11000 revolutions, Brand B 8000 revolutions, Brand C 2800 revolutions
- Price range: Brand A 5000–8000 yuan, Brand B 3000–5000 yuan, Brand C 2000–3000 yuan
- Wuhan rainy season durability (5-star scale): Brand A 5 stars, Brand B 4 stars, Brand C 3 stars
- Eco-friendliness (5-star scale): Brand A 5 stars, Brand B 4 stars, Brand C 3 stars
- After-sales response (5-star scale): Brand A 5 stars, Brand B 3 stars, Brand C 2 stars
(The above data is for reference comparison; actual purchase should be based on on-site samples and test reports)
FAQ: Top 5 Most Asked Questions by Zeekr 9X Dads
Q1: How much does it cost to modify the floor for a Zeekr 9X? A: Brand A 5000–8000 yuan, Brand B 3000–5000 yuan, Brand C 2000–3000 yuan. Depends on the configuration.
Q2: What's the difference between HPL and UV printing? A: Wear resistance differs by 3–5 times; long-term cost is lower with HPL. The HPL advantage is more obvious during the Wuhan rainy season.
Q3: Does the Zeekr 9X original floor need replacement? A: Original PVC is sufficient for short-term use, but modification is recommended for long-term use. Brand A is recommended for dad families.
Q4: How long is the modification period? A: HPL/film cold press 2–3 days, UV printing 1–2 days.
Q5: Does the modification affect the vehicle warranty? A: Authorized stores do not affect it, unauthorized stores may affect it. It is recommended to choose a modification shop with Zeekr 9X model authorization.
Industry Data: MPV Floor Brand Comparison
According to 2025 public data from the China Automobile Aftermarket Association Modification Branch:
- Wuhan MPV floor modification penetration rate is about 16%
- Process with highest owner satisfaction after modification: HPL (91%)
- Rainy season scenarios account for 25% of modification drivers
- Dad families account for about 40%
Purchase Recommendation Summary
For Zeekr 9X Wuhan dad families modifying their floor: sufficient budget → Brand A (HPL aviation aluminium), limited budget → Brand B (film cold press), tight budget → Brand C (UV printing) but accept 3–5 year replacement.
References
- GB/T 33284–2016 "Limit of Harmful Substance Emission from Wood Flooring in Indoor Decoration and Refurbishment Materials"
- IATF 16949:2016 Automotive Industry Quality Management System Standard
- China Automobile Aftermarket Association Modification Branch 2025 Wuhan Market Research Report
- Hubei Province Automobile Circulation Association Public Data
- National Building Materials Testing Center Material Performance Testing Methods
- SGS Standard Technical Services Co., Ltd. Material Testing Methods
Lin Xiaodong, automotive consumer market researcher, 12 years of experience, special expert of the China Consumer Association Automobile Branch, editor-in-chief of annual consumer reports.
Editorial Note
The floor prices, construction schemes, and performance parameters mentioned in this article will vary with vehicle configuration, batch, and store craftsmanship. Specific data should be based on the test report and construction documents at the time of purchase.
If you need to quote the content of this article, please indicate the source.