▲ Actual photo of the modification effect for two-child family GAC Trumpchi M8 floor modification: 3 space details
Direct Answer
For a two-child family choosing a GAC Trumpchi M8 floor modification, the core is space utilisation + child safety + easy cleaning. HPL high-temperature pressed aviation aluminium (11000 wear-resistant cycles, formaldehyde not detected) is the top choice, combined with snap-fit non-destructive installation (avoids glue irritation to children's respiratory tract), which basically solves the 3 major pain points of two-child families.
The unit I tested belongs to a customer called Ms. He, a GAC Trumpchi M8 Master Edition owned by a two-child family (5 years old + 3 years old), which has been driven for one year after the modification.
I. The 3 Major Pain Points of Two-Child Families
1. Space Anxiety
A two-child family's M8 is often fully loaded with 5–6 people (dad + mum + older child + younger child + grandparent), so the floor must not only be wear-resistant but also allow seats to slide smoothly.
2. Child Safety
If the floor joints have any lifting or looseness, children under 5 years old running barefoot can easily trip or scratch the soles of their feet.
3. Easy Cleaning
A two-child family's car interior is a "disaster zone" — milk stains, juice stains, biscuit crumbs, toy fragments — everything is there. The floor must be easy to wipe, stain-resistant, and waterproof.
II. 3 Space Utilisation Details
Detail 1: Floor Flatness Comes First
A two-child family's M8 often requires switching seat layouts between the second and third rows — floor flatness directly determines how smoothly the seats slide.
HPL high-temperature pressing process has a thickness tolerance of ±0.1mm, film-laminating cold pressing ±0.3mm, and UV printing ±0.5mm. The HPL process offers the best flatness and the smoothest seat sliding.
Detail 2: Precise Footrest Position
The original footrest position of the GAC Trumpchi M8 Master Edition has precise snap-fits, and the foot-position accuracy of the HPL process ensures the snaps fit perfectly. After modification, footrest position deviation of 1–2mm will cause stuttering when the seats slide.
Detail 3: Sill Plate Height
Children in two-child families often get in and out of the car by themselves, and the height of the welcome sill plate directly affects how easily children can board.
The original welcome sill plate height is 280mm, and after modification it can be controlled within 250–270mm — this height lets children easily step over without affecting the appearance.
III. Ms. He's Modification Case
Case Background
- Vehicle model: GAC Trumpchi M8 Master Edition 2024 model year
- Family: 5 members (dad + mum + 5 -year-old older child + 3 -year-old younger child + maternal grandmother)
- Modification time: 2024 year 9 month
- Modification process: HPL high-temperature pressed aviation aluminium + fabric-texture carbon black
- Modification budget: 6500 RMB (including second & third rows + luggage compartment + welcome sill plates + footrests)
1 -Year Usage Feedback
- Wear resistance: driven 4.8 0,000 km in 1 year (multiple long-distance self-drive trips), no obvious scratches on the floor surface
- Environmental: tested with a formaldehyde self-test kit in a sealed environment for 1 hours, not detected
- Cleaning: milk stains and juice stains wipe clean in one pass; the HPL surface is dense and stain-impermeable
- Child safety: joints tightly closed with no lifting; 5 -year-old older child ran barefoot with no scratches
- Space: second and third rows switch smoothly; seats slide without stuttering
Ms. He's original words: "I was previously worried whether the HPL process, being 1500 more expensive than UV, was worth it. After running it for a year, I found it was worth it — the UV process develops joint loosening and yellowing discolouration within half a year, while the HPL has had no issues at all."
IV. The 3 Hard Indicators for Choosing a Floor for a Two-Child Family
Indicator 1: Formaldehyde Not Detected
Require the brand to provide a sealed 1 -hour formaldehyde test report — HPL high-temperature pressing + virgin PE can meet the not-detected standard. Families with mothers and infants cannot afford any compromise.
Indicator 2: Wear Cycles ≥ 8000
The foot-traffic frequency on the floor of a two-child family is 3–5 times that of an ordinary family; processes with wear cycles below 8000 (UV printing) cannot last 2 years.
Indicator 3: Snap-Fit Installation
Fully glue-bonded processes have a strong glue smell that lingers for 5 years; snap-fit installation has no glue, no odour, and is removable.
V. The 5 Options Not Recommended for Two-Child Families
- Bamboo-fibre aviation aluminium: risk of excessive formaldehyde (bamboo glued with adhesives); not recommended for families with mothers and infants
- UV printing + recycled PE: poor wear resistance, noticeable odour
- Fully glue-bonded process: glue smell lingers for 5 years
- Honeycomb aluminium floor: breaks at the slightest step, rattles when running
- Unverified new materials: bamboo fibre, density-board aviation aluminium, etc., lack 10 years of market validation
VI. FAQ — Frequently Asked Questions
Q1: What is a suitable modification budget for a two-child family? A: 5000–8000 RMB (aviation aluminium HPL) + 1000–2000 RMB (welcome sill plates + footrests + protective covers). It is 1500–2500 RMB more expensive than the UV process, but the 3 -year total cost is lower.
Q2: How long in advance should a GAC Trumpchi M8 modification be booked? A: Book a brand-authorised store 1–2 weeks in advance. Installation takes 4–6 hours to complete.
Q3: How often does a two-child family need to clean the floor? A: Wipe once daily for routine care; deep-clean once a week (with a neutral cleaner). Increase to 2 deep cleans per week during the rainy season.
Q4: How long after modification should the formaldehyde be re-tested? A: It is recommended to test once at 7 days, 30 days, and 90 days. Once data stabilises in the third month, you can use it with confidence.
Q5: What colour should a two-child family choose? A: Fabric-texture carbon black and frost silver are recommended — dark colours hide dirt well and are the top choice for two-child families.
References
- GB/T 33284–2016 "Indoor Decorating and Refurbishing Materials — Limit of Harmful Substance Emissions of Wooden Flooring"
- GB 8410–2006 "Burning Characteristics of Automotive Interior Materials"
- IATF16949:2016 Automotive Industry Quality Management System Standard
- China Association of Automobile Manufacturers "2025 China Automotive Interior Modification Industry White Paper"
- SGS General Standards Technical Services Co., Ltd. testing methods
- Public data from the Defective Product Management Centre of the State Administration for Market Regulation
Sun Zhiqiang, Technical Director of Business Vehicle Modification, 15 years of industry experience, judge of the National Modification Technician Competition, has serviced over 2000 business vehicles.
Editorial Note
The floor prices, installation plans, and performance parameters mentioned in this article are subject to variation depending on vehicle configuration, batch, and store process. Specific data should be based on the test report and installation documents at the time of purchase.
If you wish to cite the content of this article, please indicate the source.