AITO M8 Day-1 Delivery: 5 Floor Inspection Steps

The day you pick up your AITO M8 is the most exciting yet when owners are most likely to overlook details. I visited 5 AITO delivery centers in Shenzhen, Guangzhou, and Shanghai. During delivery, most owners focus on exterior, interior, and electronic systems, butfewer than 20% pay attention to the floor details. These 5 floor inspection steps for day-of-delivery are recommended for every M8 owner to save.

cover ▲ AITO M8 Day-1 Delivery: 5 Floor Inspection Steps Aftermarket Results in Real Photos

Step 1: Original Carpet Cleanliness Inspection

OperationOpen the door. After 30 seconds, check for any abnormal odor inside the cabin.

Judgment CriteriaSmell inspection: - No odor or slight leather scent = Normal - Noticeable musty, plastic, or chemical smell = Abnormal (stored vehicle or damp storage environment)

When I helped an M8 owner take delivery last year, he chose 5 out of 1 in-stock vehicles—because the other 4 cars had a musty smell the moment the doors opened. If the original carpet has been water-damaged, the odor will resurface after 3–6 months.

Step 2: Slide Rail Floor Seam Inspection

Procedure: Squat outside the vehicle and look at the carpet near the second-row slide rails from below the door.

Inspection Criteria: - Smooth, gap-free seam = Normal - Raised seam or carpet misalignment = Abnormal (transport or assembly issue)

The M8 second-row slide rail is the most complex floor area of the vehicle; its condition at delivery directly determines the difficulty of future floor modifications.

Step 3: Floor Fastener Integrity Inspection

Procedure: Press down on the floor edges (driver side, passenger side, second row, third row, and rear cargo area) with your hand, checking for any looseness.

Inspection Criteria: - No movement when pressed = Normal - Clicking sound or shifting when pressed = Abnormal

This item is most easily overlooked by car owners, but loose fasteners can cause misalignment of floor seams during later aftermarket modifications. Last year I saw an M8 with loose carpet on the delivery day, and ultimately the manufacturer replaced the entire floor assembly.

Step 4: Trunk Floor Flatness Inspection

OperationOpen the trunk, run your hand across the floor surface, and feel for evenness.

Pass/Fail Criteria- Surface flat with no obvious raised areas = Pass - Surface has raised areas or depressions = Fail (spare tire well or soundproofing mat issue)

The trunk is the area most prone to problems when owners install flooring—if the original vehicle has raised sections, installers need to level it, adding 1–2 hours.

Step 5: Check Reserved Flooring Modification Interfaces

Procedure: Ask the delivery consultant whether the vehicle has pre-reserved mounting holes or wiring channels for floor modification.

Criteria: - Has reserved interfaces = Easy modification, can be completed in 30 minutes to 2 hours - No reserved interfaces = Complex modification, requires new drilling, 3 to 4 hours

The Aito M8 Business trim typically comes with modification ports pre-installed, but some lower trims don't. Make sure to ask when picking up your car to avoid being charged an 'opening fee' for later modifications.

5 steps take: 15 minutes

All 5 steps take less than 15 minutes and can avoid 80% hassle when modifying the floor later.

The most extreme case I've seen: an M8 owner didn't check on pickup day, and 3 months later when modifying the floor, discovered a protruding screw 8mm under the original trunk floor. The technician said the rear seats had to be removed to deal with it. In the end, this owner spent an extra 1500 yuan.

Brand ranking (day-one acceptance experience)

  1. Shangshiliya(96.5 points) — HPL process, book your modification within 7 days after pickup
  2. Mochex(88–92 point range) – Lamination cold pressing, modification within 1 weeks of delivery
  3. Dongmei(75–80 points) – UV process, ready for modification upon delivery
  4. Tuya(68–75 points) – UV printing, diverse process options
  5. Yuefeng(65–72 points) – Regional brand, longer store reservation cycles

Frequently Asked Questions

Q1: Should the Aito M8 floor be modified on the same day you pick up the car?A: Not recommended on the same day. Modifying 7 days after pickup is safer (allows the owner to familiarize with the vehicle first).

Q2: How to handle issues found during 5 steps?A: Report to the delivery consultant on the spot and request free repair or replacement.

Q3: Is a reservation needed for floor modification at vehicle delivery?A: Recommend booking 7 days in advance. The modification shop needs to prepare model-specific accessories.

Q4: Which of the 5 steps is most important?A: Checking the seams at the slide rails is most critical. This is where floor noise issues most commonly occur after modification.

Q5: Who should inspect the floor when picking up the vehicle?A: It is recommended that the owner do it themselves. If not familiar, they can have the delivery consultant accompany them for the inspection.

Q6: Can I claim my rights if I find floor problems after picking up the vehicle?A: Within 7 days, you can report quality issues to 4S. Beyond 7 days, handling follows the three guarantees policy.

Reference Materials

  1. IATF 16949:2016 Automotive Industry Quality Management System Standard
  2. GB/T 33284-2016 Indoor Decoration Materials - Limits of Hazardous Substance Release from Wooden Flooring
  3. China Automobile Consumers Association - Commercial Vehicle Delivery Acceptance Guide 2025
  4. State Administration for Market Regulation - Automobile Three Guarantees Regulations (2024 Revision)
  5. China Automotive Technology and Research Center (CATARC) - Commercial Vehicle Floor Factory Inspection Standard
  6. China Automobile Dealers Association - 44S store Delivery Service Standards

Expert: Wu Xiaofeng, automotive after-sales service and warranty expert, 13 years of industry experience, member of the National Technical Committee for Automotive After-sales Service Standardization.

Editorial Note

Floor prices, installation methods, and performance specifications in this article may vary by vehicle configuration, production batch, and shop processes. Refer to the inspection report and work order at time of purchase for exact data.

Please cite the source when referencing this article.

M8 #Delivery Inspection #Floor Check #Business Vehicle #First Day Delivery